-
Nebula Intelligent Converter
In an energy storage system, an intelligent converter (or energy storage converter) is a device for bidirectionally converting electrical energy between a battery system and a power grid (and/or load) can control the charging and discharging process of the battery. For AC-DC conversion, it can directly supply AC load without grid.
-
Nebula Laptop Li-ion Battery Pack Test System NEP-02-V010
Nebula laptop li-ion battery pack quick test system NEP-02-V010 is an integrated test system mainly applied for laptop li-ion battery pack (1S~4S) ’s basically functional characteristics test and functional protection test of laptop li-ion battery pack.
The equipment is applicable to the rapid test of li-ion battery products below 20V such as: laptop li-ion battery packs, drone battery packs, power tools, etc. The equipment can provide maximum charging voltage of 20V, maximum charging current of 20A and maximum discharging current of 30A
Contact Us
Company: Fujian Nebula Electronics Co., LtdAddress: Nebula Industrial Park, No.6, Shishi Road, Mawei FTA, Fuzhou, Fujian, China
Mail: info@e-nebula.com
Telephone: +86-591-28328897
Fax: +86-591-28328898
Website: nebulaate.com
Kunshan Branch: 11th Floor, Building 7, Xiangyu Cross-Strait Trade Center, 1588 Chuangye Road, Kunshan City
Dongguan Branch: No. 1605, Building 1, F district, Dongguan Tian’an Digital Mall, No.1 Gold Road, Hongfu Community, Nancheng Street, Dongguan City
Tianjin Branch: 4-1-101, Huading Zhidi, No.1, Haitai Huake Third Road, Xiqing Binhai High-tech Industrial Zone, Tianjin City
Beijing Branch: 408, 2nd Floor East, 1st to 4th Floor, No.11 Shangdi Information Road, Haidian District, Beijing City.
-
Nebula Mid-range Li-ion Battery Pack Test System BAT-NEHP-653080-V004、BAT-NEHP-100100150-V001
This is an integrated test system mainly used for testing the basic functional and protective characteristics of mid-range power battery packs such as li-ion battery packs for electric bicycles, power tools and energy storage battery packs.
It is applied for testing the products of li-ion battery pack below 100V, and the equipment can provide maximum charging voltage 100V, maximum charging current 100A, maximum discharging current 150A, and maximum output power 7.2KW.
-
Nebula 630 kW Energe-storage Converter (NEPCS-6301000-E101)
In the energy storage system, the energy-storage converter is a device connected between the battery system and the power grid (and/or load) to realize bi-directional conversion of electricity, which can control the charge/discharge process of the energy storage battery, convert AC and DC, and supply power directly to the AC load in the absence of the power grid.
It can be applied to the power generation, transmission and distribution side, and user side of the power storage system. It is mainly applied in renewable energy stations such as wind, solar power stations, transmission and distribution stations, industrial and commercial energy storage, distributed micro-grid energy storage, PV-based electric vehicle charging stations, etc.
-
180kW/240kW/360kW Nebula Integrated EV DC Charging Station
The Nebula integrated DC EV charging station is an auxiliary device for charging and replenishing electric vehicles, providing charging interface, human-computer interface and other functions to control the charging of electric vehicles, realize charging on/off, intelligent billing and other operations. The DC charging station is developed by embedded microcontroller as the main controller, including user management, charging interface management, e- receipt and report generation, network monitoring, etc.
In addition, the unique function of on-board power battery safety detection realize rapid battery test of electric vehicles while charging, thereby ensuring the battery safety and reliability, and improving its service life.
-
Nebula 630 kW Energe-storage Converter NEPCS-630 CE
In the energy storage system, the energy storage converter is a device connected between the battery system and the power grid (and/or load) to realize bi-directional conversion of electricity, which can control the charge/ discharge process of the energy storage battery, convert AC and DC, and supply power directly to the AC load in the absence of the power grid.
It can be applied to the power generation, transmission and distribution side and user side of the power storage system. It is mainly applied in renewable energy stations such as wind, solar power stations, transmission and distribution stations, industrial and commercial energy storage, distributed micro-grid energy storage, PV-based electric vehicle charging stations, etc.
-
Nebulas Battery Cell Voltage and Temperature Monitoring System(BAT-NEM-32V32T-V008、BAT-NEM-192V32T-V008)
The system consists of a voltage acquisition module and a temperature measurement module. It is used to monitor the voltage of each series,battery pack and the temperature at a specified location during the charging and discharging process of the battery pack or other performance tests. The monitored voltage and temperature can be used as a technician Judgments and alarms during battery pack analysis or operating condition simulation test system testing.
-
Nebula AC charger
AC charging piles can be divided into two types: wall-mounted and column type. It has a small footprint and is easy to place, which can be used for charging small electric vehicles in residential areas and commercial buildings.
-
Nebula Mobile Phone & Digital Product Li-ion Battery Pack Final Product Test System(BAT-NEPDQ-01B-V016)
It is the Pack comprehensive test system applied to the basic and protection characteristics tests of final products/semi-finished products on the mobile phone and digital product Li-ion battery pack production lines and the protection ICs (supporting I2C, SMBus, HDQ communication protocols).
-
Power Battery Pack BMS Test System(BAT-NEHP-36K300-V004)
The system is suitable for electric tools,garden tools, electric bicycles, backup power supplies, etc. It is designed for the integration of basic and protection characteristic test of 4S-36S Li-ion battery PCM. It supports parameter download & comparison, PCB calibration of the power management IC (supports 12C, HDQ, SMBUS and other customized protocols)
-
Power Battery Pack BMS Test System(BAT-NEBMS64S1000V400A-A)
This system is a suitable tester for the BMS of 1S-64S battery pack. It consists of LMU and BMCU module.Single analog cell voltage is within5000mV/3A.Modular design with each chassis composed of 40 electrically isolated independent analog batteries.Parallel function available.
-
Notebook Li-ion Battery Pack PCM Test System
It is a PCM integrated test system, suitable for basic and protection characteristics of the PCM in the notebook Li-ion battery, which is mainly for parameter download, calibration and protection function test of the TI Corporation Gas Gauge IC (BQ20Z45, BQ20Z75, BQ28Z610, BQ3050, BQ3055, BQ3060,BQ40320, BQ40Z55, BQ40Z50, BQ30Z55, BQ34Z100, BQ9000, BQ40Z551, BQ27546, BQ27742, BQ27741).
